Pneumatic Torque & Tension Tools

Please Click Photos or Text for More Details
The Revolution	SPEED with a Twist	The BASIC with a Twist	The FLASH

jGUN FLIP™ High Speed Torcgun When you are tired of switching from a run-down tool to a pneumatic or hydraulic torque tool, this is the 1600 rpm Answer!	jGUN Dual Speed Torque/Tension Gun When parallel joint closure is required, zip down the nuts with pre-torque then torque or tension them by means of a washer.	jGUN Single Speed Torque/Tension When tool universality and durability is a must, the J-Gun operates with or without reaction arm or backup. A HYTORC FIRST!	The FLASH Electric Torque Multiplier featuring unmatched convenience & portability!

jGUN for Wheel Bolting Job Specific Tool	The Dual Speed PLUS Gun Run in High Speed mode even with reaction arms and other accessories attached to the gun.	The Dual Speed Heat Exchanger Text Coming Soon!	FROG BOLT Adapter Reduce Job Time while Increasing Safety and Tool Life!

Suggested Hytorc Equipment for Standard Stud and Heavy Hex Nut Sizes

Stud Size (Bolt Diameter)		Nut AF (Nut across the flat) Req. Socket or Hex Link		Pneumatic Tools - jGun Series
Imperial	Metric	Imperial	Metric	Single	Dual	FLIP
7/8"	M24	1 7/16"	36mm	J-.5	DS-1	FLIP-.5
1"	M27	1 5/8"	41mm	J-.5	DS-1	FLIP-.5
1 1/8"	M30	1 13/16"	46mm	J-1	DS-1	FLIP-1
1 ¼"	M33	2"	50mm	J-1	DS-1	FLIP-1
1 3/8"	M36	2 3/16"	55mm	J-1	DS-1	FLIP-1
1 ½"	M39	2 3/8"	60mm	J-3	DS-3	FLIP-3
1 5/8"	M42	2 9/16"	65mm	J-3	DS-3	FLIP-3
1 ¾"	M45	2 ¾"	70mm	J-3	DS-3	FLIP-3
1 7/8"	M48	2 15/16"	75mm	J-3	DS-3	FLIP-3
2"	M52	3 1/8"	80mm	J-5	DS-5	–
2 ¼"	M56	3 ½"	85mm	J-5	DS-5	–
2 ½"	M64	3 7/8"	95mm	J-5	DS-5	–
2 ¾"	M72	4 ¼"	105mm	–	–	–
3"	M80	4 5/8"	115mm	–	–	–
3 ¼"	M85	5"	120mm	–	–	–
3 ½"	M90	5 3/8"	130mm	–	–	–
3 ¾"	M100	5 ¾"	145mm	–	–	–